*Please contact us or make a note in notes section of your cart the application you will be using this in so we can communicate with STM on what you will be needing.*
*DESIRED CAM ARM WEIGHT SET UP OR MACHINE MODIFICATIONS, SPECIFIC TIRE USED AND ELEVATION. IF UNSURE OF SET-UP LIST YEAR, MAKE, MODEL, TIRE SIZE, VEHICLE MODIFICATIONS AND RIDING STYLE -WHERE YOU RIDE AND OUR TECH'S WILL CHECK YOUR SET-UP*
Rage 3 Wide Captured Pin Primary Clutch
Completely redesigned STM Rage 3WCP Primary clutch features a wider, thicker, more durable spider with our new composite spider roller bushings for long life and quiet operation. The new design utilizes a captured pin with set screws for maximum durability and ease of use. Along with the new captured pin design we have all new composite cam arm bushings for long life in harsh environments. We have also added a finned fixed sheave for added air flow and cooler operation.
- STM Rage 3WCP Primary
- STM Primary Spring
- PATV21 Teal Primary Spring (2 1/2" load 40 lbs - 2 1/4" load 68 lbs - 1 1/4" load 200 lbs)
- 810006 Red/Silver-Orange Primary Spring with .125 spring shim installed (2 1/4" load 96 lbs - 1 1/4" load 187 bs))
- PATV22 Bright Yellow Primary Spring (2 1/2" load 29 lbs - 2 1/4" load 75 lbs - 1 1/4" load 260 lbs)
- PATV1 Red (with 50ys cam arms only)Primary Spring (2 1/2" load 35 lbs - 1 1/4" load 140 lbs)
- PATV2 Orange Primary Spring (2 1/2" load 75 lbs - 1 1/4" load 140 lbs)
- PATV14 Dark Blue Primary Spring (2 1/2" load 80 lbs - 1 1/4" load 160 lbs)
- PATV18 Black Gold Primary Spring (2 1/2" load 80 lbs - 2 1/4" load 104 lbs - 1 1/4" load 200 lbs)
- PATV23 Red / Black Primary Spring (2 1/2" load 118 lbs - 2 1/4" load 139 lbs - 1 1/4" load 225 bs)
- PATV24 Red / Silver Primary Spring (2 1/2" load 138 lbs - 2 1/4" load 159 lbs - 1 1/4" load 245 bs)
- 810016 Black / Green Primary Spring (2 1/4" load 165 lbs - 1 1/4" load 285 bs)
- PATV12 Almond Primary Spring (2 1/2" load 19 lbs - 1 1/4" load 160 lbs)
- STM Primary Weight Set
- 50 Gram Base HB Series Part# 1001585
- 60 Gram Base HB Series Part# 1001584
- 50 Gram Base AFP Series Part# 2001151
- 60 Gram Base AFP Series Part# 2001245
- 50 Gram Base Y Series Part# 1001393
- 60 Gram Base Y Series Part# 1001394
- High Engagement - 60 Gram Base .470 wide Notched HBRN Series Part# 1001631
- High Engagement - 72 Gram Base .570 wide Notched HBRN Series Part# 1001632
The Rage 3WCP primary has two different styles of adjustable cam arms available. The AFP series of weights are used for the RS-1 and lower power turbo applications. The HB series weights are for the Pro XP and XP Turbo/Turbo-S, they feature a "hump back" design and offer good belt grip on the bottom end and awesome mid-to-top end performance especially on higher HP machines. The Rage 3WCP clutch works well with stock and aftermarket tunes that utilize the stock turbo and pump gas, for race gas tunes or bigger turbos we recommend the Rage 4WCP primary clutch.
Included with the clutch is a new retaining bolt, lock washer, bolt retaining washer, fastener kit to calibrate the cam arms, and a compression tool to change the weights or spring in the clutch without removing it from the engine.
The Rage 3WCP utilizes the STM PATV style springs. The clutch will be shipped fully assembled with a BASELINE weight setup installed based on the specs of the machine the customer provides. It is the customers responsibility to ensure that the clutch is calibrated properly for their machine per the instructions provided. This clutch uses the OEM belt specified for your machine. Aftermarket belts can also be used however most of the time an aftermarket belt will require a slightly different calibration for maximum performance/belt life. This primary can be used with the OEM secondary or the billet STM Tuner secondary clutch.
Build time on STM Clutches is roughly 2-3 weeks on non-stock clutches.
Please Review Terms & Policies on cancellation of order!