FREE SHIPPING OVER $400+ OPTION TO DO 4 EQUAL PAYMENTS USING SHOP PAY
FREE SHIPPING OVER $400+ OPTION TO DO 4 EQUAL PAYMENTS USING SHOP PAY
Cart 0
2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace
2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace
2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace
2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace
2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace
2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace
KWI

2017-2021 Can-Am X3 KWI RF2/RF2 PRO Clutch Support Brace

Regular price $475.00 $475.00 Unit price per
Shipping calculated at checkout.

KWI RF2 for Can-Am X3

KWI second generation Re- Enforcer. A MUST for higher HP Can AM X3 customers. We substantially improved our original design and added a ton more features. Strengthen, stabilize, and support your clutch shafts to increase wheel HP, prevent belt misalignment due to shaft flex, and prevent taper uncoupling on high HP motors! No need to remove the RF-2 to change the belt, quick and easy tools included. 

When your clutches shift under acceleration the belt pulls the 2 clutches together with extreme forces bending the gearbox input shaft and crankshaft because they are only supported on one side. This bending causes clutch misalignment; belt slip; belt heat; wheel HP loss; and on high HP engines this flex will cause bolt breakage; primary clutch taper uncoupling and severe damage. The KWI RF-2 fixes all these issues by supporting the opposite side of the shafts. Works with the KWI Float Mod and OEM non-floated Can-Am X3 clutches. 

Made with the highest grade materials, lightweight, and ultra-strong 7075 billet structural aircraft grade aluminum.

*DOES NOT WORK WITH OEM COVER!

RF2 PRO

*COMPLETELY REPLACES OEM INNER AND OUTTER CLUTCH COVERS.

The ultimate structural gearbox-motor and clutch-clutch double shear Can Am X3 enclosure is here!! KWI has had this in testing over a year and finally here it is in beautiful billet ready for you to bolt on!

This is the PRO add on to our second-generation RF-2. A MUST for higher HP Can AM X3 customers who run in the dunes or are dedicated to drag racing. On the big HP cars we needed to strengthen the gearbox to motor mounts to eliminate movement and cracking as well as provide a complete double shear clutch support that can also be modified as a race legal scatter shield when a .125 piece of flat aluminum is installed over the top and front. Strengthen, stabilize, and support your clutch shafts to increase wheel HP, prevent belt misalignment due to shaft flex, and prevent taper uncoupling on high HP motors! No need to remove the RF-2 to change the belt, quick and easy tools included. 

Made with the highest grade materials, lightweight, and ultra-strong 7075 billet structural aircraft grade aluminum.