With the stock ECU flashing difficulties; the WSRD Motec Packages make this the last ECU your RR will ever need!
What's Included?
- WSRD|JRR M130 Motec ECU
- WSRD|JRR Wideband Kit
- WSRD Green Turbocharger Calibrations
- Includes all available fuel options
- Treal Performance High Performance Intercooler
- WSRD Green Turbocharger
- Includes WSRD Install Kit
- WSRD ID Injector Set + PNP Adapters
- Treal Performance AEM Fuel Pump & Rewire Kit
- Treal Performance Catch Can Kit
- WSRD Ethanol Tester
| WSRD Tune | Fuel Octane | Boost - PSI | Crack Pressure | HP |
| Stock | - | - | - | 190 |
| WS220RR-G.91 | 91 Octane | 25 | 12 | 241 |
| WS220RR-G.93 | 93 Octane |
26 |
12 | 247 |
| WS240RR-G | 98+ Octane | 28-29 |
14 | 271 |
| WS260RR-G | E85 | 28-29 |
14 | 292 |
| WS260RR-G* | E85 | 28-29 | 14 | 305 |
Please Note: WSRD recommends UTV96, MS100 or MS109 race gas options when utilizing the WS240RR-G tune files. An E70 ethanol rating is required when utilizing the WS260RR-G tune files. Please use the supplied ethanol tester before use. The WS260RR-G* is built utilizing the WSRD Billet X Intake Manifold.
Additional ECU Options:
- Motec Dash Options
- Motec Key Pad Options
- WSRD Fuel Pressure Kit
- WSRD Oil Pressure Kit
- WSRD Flex Fuel Sensor Kit
Please consult with WSRD before purchase if you are looking for any additional custom options.
Clutching Options:
- KWI AO Green Clutch Kit + #4 Helix
- KWI|TAPP Primary Clutch
- WSRD Spec STM Rage 4WCP Primary Clutch
Launch Control Options:
- KWI Stock Primary Clutch System: 26-2700 RPM
- Requires WSRD Pink Primary Spring
- KWI|TAPP or WSRD Spec STM Clutch System: Custom RPM Setting
- Consult with KWI or WSRD for additional information and guidance on components requirements for higher engagement launch control configurations
Tune Features:
- Speed Limiter Removed
- 9000 RPM Rev Limit
- 2-Foot Operation Enabled
- Radiator Temp Lowered to 85* C | 185* F
- Radiator Fan Disabled at 80* C | 176* F