2020 Can-Am X3 Turbo RR Stage 3 Performance Package: Sport Exhaust

Regular price $1,685.00
Shipping calculated at checkout.

Only 0 items in stock!
  • Treal Performance Sport Exhaust

  • 3.0" Full System with Muffler 

  • Available with OR without resonator

  • Dynojet Power Vision

  • PWRTune Stage 3 (or Stage 3int) Tune

  • Optional Velocity Intake Kit

Best bang for your buck performance package features the unbeatable Treal 3.0" exhaust. This is the best performance, looks and value X3 exhaust you can find on the market. Combined with a Power Tune programmed Power Vision that is ready to go with a Stage 3 tune. Add the optional Velocity Intake kit and upgrade to the Stage 3int tune for you X3.

2020 CanAm Maverick X3 Turbo RR

  • Full 3.0 inch Turbo Back System

  • 304 Stainless Steel

  • Flex Coupler After Turbo

  • Fully Tig Welded

  • Center / Stock Exit

  • Stainless Steel Turbo Muffler

  • Stainless Steel Resonator

  • Max Power & Not Too Loud

Treal Performance full 3.0 inch turbo back exhaust for the Maverick X3, best performance without being too loud. Most full exhaust systems on the market will make similar power if they are at least 2.5 inches from the Turbo back. The Treal Performance full 3.0 inch system matches any exhaust on the top end, and test better by a notable margin out of the hole. No exhaust will make more bottom end torque and horsepower in a drag race launch or low end pull. And unlike many other systems that are too loud or sound like an RZR this one has that sports car sound similar to stock with the performance growl you are looking for. 

Add to that the killer all stainless look which exits out the center this system is a top selection in the looks department. Run this with or without the rear plastic cover. The sound is not obnoxiously loud like you may thing a full 3.0 open system would be. 

This Sport Exhaust features a stainless steel resonator (in the stock cat location) and a compact stainless steel turbo muffler in combination. 


Dynojet Power Vision 3 now with PWRTune performance tuning for the CanAm X3 Maverick X3 is a performance tuner and data monitor that offers the latest flash tuning technology, real-time data monitoring, and more. Using the Dynojet Power Vision CX you can now purchase one or more of our performance tunes for your X3 and have the added benefit of live telemetry, data logging, read and clear trouble codes, and more. Your Power Vision unit will come pre-loaded with the tune(s) of your choice customized with your options. 

The Power Vision unit plugs into your vehicles data port, you select your tune and program to your car (takes about 15 minutes). You can put back to stock anytime. Once flashed with a performance tune the screen will show live telemetry: engine temp, boost, throttle position, etc. You can leave the Power Vision plugged in or you can disconnect and leave it in the trailer, your tune will remain in your cars ECU. 

For your 2017 you can also purchase a 2018 Turbo R fuel pump $280, send in your ECU for upgrade to a stock 2018 Turbo R format, and then run these same 2018 Turbo R spec tunes on a Power Vision. There is no charge for the ECU upgrade to 2018 Turbo R format but you will have to send your ECU in for that. When putting your car back to a stock tune flash your stock tune would then be stock 2018 Turbo R. 

2020 X3 Turbo RR all models (XDS, XRS, XMR, XRC, Max RR)


Stage 3 20psi - minimum 91 octane unleaded fuel

  • Tuned for full performance exhaust
  • +18 peak rear wheel horsepower
  • 25~35hp+ bottom end power gain


  • Stock Fuel Injectors Tune Stages
    • Stage 3int 20psi - minimum 91 octane unleaded fuel
      • Use with an open performance intake
      • Tuned for full performance exhaust
      • + 20.7 peak rear wheel horsepower
      • 25~35hp+ bottom end power gains


  • Increased Turbo Boost psi

  • Removed Torque Limiters

  • Removed Speed Limiters (optional)

  • Improved Throttle Response over Stock

  • Performance Spark Timing

  • Optimized Fuel Maps for great power and throttle response

  • Increased RPM limiter 

    • Suggested set to 8600rpm

    • Totally optional, your choice stock or higher

  • Lower cooling fan on/off temps

  • Add the ability to start the engine with no brake in any gear

  • No need for run a piggyback fuel controller

  • Retains ECO mode

  • Ready for your performance clutch tuning

  • Free Warranty/Recall Flashback Protection*

  • Upgrade your tune anytime and just pay the cost difference